Sublimation MDF Frames (Grad, Love, 2021, 2022, DAD, MOM, SENIOR, GRANDKIDS)

Measures about 6x7" main photo part is 5x7
- 1/8" Thickness
- Single Sided Sublimation
- Unisub Glossy Hard Board
- Laser Cut
- Must Remove Plastic Coating before Pressing

Set temperature to 400 degrees Fahrenheit.
Set timer to 60 seconds. 
Set Pressure at medium.
Remove protective film from product.
Print a mirror image onto CB Paper. Image should be larger than the substrate.
Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
Put a blank sheet of paper on heat press platen to keep it clean.
Place substrate face up on the heat press, with the transfer paper on top.
Cover with a non stick sheet
Press at 400 degrees F for 60 seconds with medium pressure
Remove immediately from press once finished and peel hot.

Tips:
- If the image of the final product appears light increase the pressure or the dwell time slightly (5-15 seconds).
- If the image on the final product appears blurred or substrate appears yellowed reduce the dwell time slightly (5-15 seconds).